Community Wood Facilities Assistance Act of 2025

(1) in the section heading, by striking Energy and Wood Innovation and inserting Facilities Grant;

(2) in subsection (a)—

(A) in paragraph (1)(A)(iii), in the matter preceding subclause (I), by striking woody biomass, including and inserting primarily forest biomass, including processing or manufacturing; and

(B) in paragraph (4), by striking Energy and Wood Innovation and inserting Facilities Grant;

(3) in subsection (b), by striking Energy and Wood Innovation and inserting Facilities Grant;

(4) in subsection (c)—

(A) in paragraph (1), by striking 35 and inserting 50;

(B) by striking paragraph (2); and

(C) by redesignating paragraph (3) as paragraph (2);

(5) in subsection (d), in the matter preceding paragraph (1), by striking exceed— and all that follows through $1,500,000. and inserting exceed $5,000,000.;

(6) in subsection (e)—

(A) by striking paragraph (1);

(B) by redesignating paragraphs (2) through (8) as paragraphs (1) through (7), respectively; and

(C) in paragraph (1) (as so redesignated), by inserting or market competitiveness after cost effectiveness;

(7) in subsection (f)—

(A) by striking paragraph (2);

(B) by redesignating paragraphs (3) and (4) as paragraphs (2) and (3), respectively; and

(C) in paragraph (2) (as so redesignated), by striking use or retrofitting (or both) of existing sawmill and inserting construction, use, or retrofitting of forest products manufacturing;

(8) in subsection (g)—

(A) in paragraph (1), by striking 5 megawatts of thermal energy or combined thermal and electric energy and inserting 15 megawatts of thermal energy; and

(B) in paragraph (2), by striking 25 percent and inserting 50 percent; and

(9) in subsection (h), by striking $25,000,000 for each of fiscal years 2019 through 2023 and inserting $50,000,000 for each of fiscal years 2026 through 2030.

(1) in the section heading, by striking Innovation and inserting Innovations;

(2) in subsection (c)—

(A) in the subsection heading, by striking Incentivizing use of existing milling and inserting Expanding forest products manufacturing; and

(B) by striking use or retrofitting (or both) of existing sawmill and inserting construction, use, or retrofitting for forest products manufacturing; and

(3) in subsection (d), by inserting 50 percent of before the amount.